PHMR

Cardboard Hydraulic Klingersil PHMR

Product suitable for use in non-aggressive conditions, pressure and low to moderate temperatures.

Composition

sealing the base material of organic fiber and NBR rubber.

Application Area

Sealing material for general applications. Suitable fluid at low pressures and temperatures. Good chemical resistance to air, water and oil.

PHMR

Mechanical properties - Typical values ​​for thickness 1.5mm

Compressibility ASTM F 36 A % 14
Recovery ASTM F 36 A % 40
Stress relaxation BS 7531 40 Mpa / 300º C MPa 18
KLINGER Hot Compression Test 50 MPa Dimin. thick to 23 ° C % 12
Dimin. thickness to 300 ° C % 17
Selabilidade DIN 3535/4 ml/min. 3,0
Increase in thickness after immersion in: ASTM F 146 Oleo ASTM Nº 3: 5h a 150º C % 5
Fuel B: 5h a 23º C % 7
Increase in thickness after immersion in ASTM fluid F 146 Oleo ASTM Nº 3: 5h a 150º C % 15
Fuel B: 5h a 23º C % 15
Density g/cm³ 1,55

Dimensions leaves patterns

sizes 4000 x 1500 mm | 2000 x 1500 mm
thicknesses from 0,4 mm à 6,40 mm

Contact us for special dimensions and cut together

PHMR