C-4265

KLINGERSIL® C-4265

Suitable for general non-severe applications., requires less compressive load for sealing compared to other fibre reinforced gasket materials models.

Composition

Sealing material with aramid fiber and NBR.

Areas of application

Specific material for applications with low surface compression. Suitable for liquid and gases such as oils, solvents, hydrocarbons and refrigerants.

C-4265

Mechanical properties - Typical values ​​for thickness 1.5mm

Compressibility ASTM F 36 A % 20
Recovery ASTM F 36 A % 45
Heat loss DIN 52911 % 30
Stress relaxation BS 7531 50 Mpa / 175º C / esp. 2mm MPa 23
KLINGER Hot Compression Test 50 MPa Thickness. decrease at 23º C % 18
Thickness. decrease at 200º C % 25
Sealability DIN 3535/4 ml/min. 0,05
Thickness increase after immersion in: ASTM F 146 Oil ASTM Nº 3: 5h a 150º C % 7
Fuel B: 5h a 23º C % 10
Thickness increase after immersion in ASTM F 146 Oil ASTM Nº 3: 5h a 150º C % 13
Fuel B: 5h a 23º C % 18
Density g/cm³ 1,55

Dimensions of the standard sheets

Sizes 4000 x 1500 mm | 2000 x 1500 mm
Thicknesses from 0,4 mm to 6,40 mm

Consult us for special dimensions and cut gaskets.

C-4265